ENCAD T-200 Manual de usuario descargar pdf (Pagina 6)

T-200+ Technical Guide

4. Reinstall the print cartridges, ensure the snap-on reservoir is seated securely and

flush onto the cartridge opening. Select

Shortcut Menu - Down Arrow - Access Cartridges -

Select

to move the carriage back to the service station.

5. Repeat the Clean test, followed by the Prime pattern. If the print quality still has not

improved and the cartridge is not empty, a new cartridge may be necessary. Refer to the

on-line maintenance guide supplied on the system CD supplied with the printer for

complete maintenance instructions. If the print quality has not improved after this

cleaning process, contact technical support for

assistance. If print quality still does not improve, your

printer may require service.

5. Line Length Accuracy

Line length is to be measured and verified as accurate to the

greater of ± 0.2% of length or ± 0.015 in. (0.38 mm). Length

accuracy to be measured in vector mode only with calibration

“on” for both roll and sheet feed. The media is 4 mil drafting

matte film. Test between 45% - 55% relative humidity.

6. SEH 100 BaseT Ethernet Print Server

A. The 100baseTX parallel print device allows connection between a 100 baseTX network

environment and the ENCAD T-200. The SEH print server draws power directly from the printer’s

parallel port.

" High speed print server; 1 Mbytes/sec

data rate (compliant with IEEE 1284)

" Powered by parallel port

" ECP mode support

" Protocols; IPX/SPX, TCP/IP, WINS,

BCP/TBCP, NetBIOS/SMB, IPP, DNS,

SLP, SNMP, SMTP, Ethernet/Token Talk

Phase 2, HTTP/HTML

1 2 3 4 5 6 7 8 9 10 11 ... 98 99

Sin comentarios

ENCAD T-200 Manual de usuario Pagina 6