ENCAD T-200 Manual de usuario descargar pdf (Pagina 3)

T-200+ Technical Guide

To install a new cartridge:

Step 1. Remove tape from Cartridge first!

Step 2. Attach cartridge to carriage assembly

Step 3. Remove tape from Ink Caddy

Step 4. Attach Caddy onto Cartridge, ensure a tight seal

exists

Step 5. Start printing, ensure level does not fall below low

level mark on Caddy. Do not print when empty.

3. Print Configurations

4-K Pigment (Black CAD only)

CMY Dye + K Pigment (CAD + color)

CMYK Dye (color graphics only)

Four CMY Dye and 1 K Pigment cartridges are supplied with printer; CMYK CIS2 ink type. The K

pigment cartridge may be replaced with a K Dye cartridge if the user decides to print full color

graphics only. Four-Black Mode (4-mono/4-grayscale) requires the use of 4 CIS2 Pigmented

black cartridges for printing monochrome line drawings at very high speed. The inks are

optimized for use on low cost bond paper and adhere to optimized media and coated substrates.

4. Open Jet Compensation & Cartridge Maintenance

A. Enabling open jet compensation (Open Jet Menu under the calibration menu) will often

dramatically improve print quality. Up to 20 jets may be toggled off in each color to maintain

picture perfect printing to support photo

(best) print modes. If enabling open jet

detection and/or activating the manual

jet bypass feature on problem jets

(clogged/misfiring jets) found in the

Prime pattern does not improve image

quality then contact technical support.

Refer to B. below.

CMYK KKKK

1 2 3 4 5 6 7 8 ... 98 99

Sin comentarios

ENCAD T-200 Manual de usuario Pagina 3