ENCAD T-200 Guía para resolver problemas descargar pdf (Pagina 37)

Printer Options 2-6

ENCAD

T-200

Reference Guide

Choosing paper options

Paper options let you define the following:

• Supply * • Media Standard • Auto-Cut

• Margins • Auto Wipe • Save Media

*Media feeding and loading are described in the Installation Sheet.

Media supply

This setting allows you to select your media supply options. The available options are

Sheet and Roll. Select Sheet if you intend to use cut sheet stock. Select Roll if you are

going to use roll paper on the roll feeder. When you load media, the printer automati-

cally detects its width. It also detects and indicates media out conditions.

➪➪

➪

To choose supply type

1 Choose Setup Menu/Paper Options/Supply=.

2 Press Select.

3 Use the up or down arrow button to display the desired supply type.

4 Press Select.

Media standard

When you create an image, you determine its size at the computer. It's important that

you know the size of the image and load the appropriate size media because the printer

automatically defines the print area based on the loaded media's width. Be sure that the

media you load is wide enough to accommodate the image. If extra length is required,

use roll media. If the media is smaller than the image, the image may be truncated.

Minimum media width is 8.5". Note that the printable area is different depending on

whether you are using roll media or cut sheets. The printable area also differs for cut

sheets depending on color or 4BLK mode. Printable areas are shown in the tables which

follow.

➪➪

➪ To choose the media standard

1 Choose Setup Menu/Paper Option/Media=.

2 Press Select.

3 Use the up or down arrow button to display the desired media standard.

4 Press Select.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 90 91

Sin comentarios

ENCAD T-200 Guía para resolver problemas Pagina 37